Southern Gold Coast, QLD

Excavation and earthmoving in Bilinga

Most of Bilinga is airport. Gold Coast Airport, the desalination plant and a university campus sit on the other side of the Gold Coast Highway from most of the houses, which fill a narrow strip immediately inland from the beach. For a backyard on that strip, Luke's ASV posi-track and 5.5 t class Kubota handle the digging and clearing, and his Fuso tipper takes the spoil away.

  • Google 5.0 out of 5 from 2 reviews
  • Liability and equipment insurance held
  • ABN 58 346 068 875
  • Free quotes and site looks
  • Luke runs every machine himself
  • Liability and equipment insurance held
Large black corrugated drainage pipe laid in a freshly dug trench, with the spoil heaped alongside
  • Owner-operatorLuke, over 10 years operating machinery
  • Based in MurwillumbahWorking the Gold Coast to Lennox Head
  • Insurance heldLiability and equipment, certificate on request
  • Google 5.0 out of 5From 2 reviews, October 2026
  • ABN 58 346 068 875Registered business name DIRT WERKS

Ground and access in Bilinga

Bilinga's whole eastern edge is a continuous sandy surf beach, from Bilinga Beach in the north to North Kirra Beach in the south, and the housing sits immediately inland from it. The beach was topped up with 50,000 cubic metres of sand in a 1989 nourishment program. Heavy rain is the other thing to know. NSW SES records that in June 2005 a low pressure system over the border caused flash flooding across the Tweed area, and the then Coolangatta Airport closed because parts of the tarmac flooded.

Send a photo of the street frontage, the side passage or gate measured with a tape, and anything overhead, like power lines or eaves. Say where the Fuso could pull in without blocking traffic, and whether the work area is sand under turf, paving or decking, so Luke can plan the machine and the clean-up.

Before you dig in Bilinga

Bilinga is in the City of Gold Coast area. These rules are worth checking before the machine is booked. Luke lodges his own Before You Dig enquiry for every job.

CheckWhat it means
Protected trees and vegetationThe City says you may need its approval before removing or pruning trees on your property. City Plan protects assessable vegetation: anything over 4 m tall, any trunk 40 cm or more around at 1.4 m above the ground, and vegetation shown on the Vegetation Management Overlay Map. Some clearing is exempt, such as near boundary fences or approved buildings (distances depend on lot size) and within 1.5 m of a pool fence. Otherwise, lodge an operational works application for vegetation clearing first.
Filling or excavation that changes ground levelFilling or excavating a site can need development approval if it changes the ground level. City Plan Table 5.8.1 sets the triggers by zone. In the Low and Medium density residential zones, an application is generally needed once the work exceeds 40 cubic metres of fill or excavation, raises or lowers the ground by more than 1.0 m, or is tied to a material change of use or reconfiguring a lot. Rural, rural residential and conservation zones use other volume and boundary triggers, and overlays can catch smaller jobs.
Acid sulfate soils on low coastal landThe Queensland Government says coastal land below 5 m AHD, about 5 m above sea level, is likely to hold acid sulfate soils, which release acid and metals when dug up or drained. On a lot shown on the City Plan Acid sulfate soils overlay map with natural ground at or below 20 m AHD, digging out 100 cubic metres or more, or placing 500 cubic metres or more of fill averaging 0.5 m deep or more, at or below 5 m AHD needs code assessment.
Works in the road reserve: vehicular crossingsA vehicular crossing, the part of a driveway between the property boundary and the road, sits on public land. The City says you need its approval to build one, and property owners are responsible for building and maintaining it. A crossing that meets the City Plan standard needs an application for a standard crossing. One that can't meet it needs a development permit for operational works. The City's online questionnaire shows which applies, and crossings should be assessed before building approval is given.
Flood-prone land and the City's flood mapsThe City's flood maps show whether a property could be affected by flooding, and a Flood level search report gives a lot's Designated Flood Level. That report doesn't show the flood extent or cover local flash flooding. On land in the Flood assessment required area of the City Plan Flood overlay map, earthworks over 5 cubic metres that aren't part of building work or a material change of use need code assessment. Check before filling or reshaping a low yard.
Fire ant biosecurity zonesAs at October 2026, much of the Gold Coast is inside Queensland's fire ant biosecurity zones, which are reviewed monthly. If any part of a property touches a zone, the whole property counts as in it. Under the Biosecurity Regulation 2016, soil, fill, mulch, turf and quarry materials from inside the zones must be handled, stored and moved under set rules. Machinery must be cleaned of soil before it leaves a site in the zones. Check the address on the fireants.org.au map.

How it works

From a photo to a finished job

  1. Call or text Luke a photo

    A wide shot, the gate or access, and the exact spot tells him most of what he needs.

  2. Get a free quote

    From your photos, or from a quick site look if the job needs it. No charge for either.

  3. Book a day

    Luke brings the right machine for the access and the job.

  4. Dig, cart and clean up

    Spoil goes out on his own tipper. The site is left tidy.

Got a job in Bilinga?

Call Luke, text him a photo of the site, or send the details through the quote form. Quotes are free.

Questions about earthworks in Bilinga

Is digging this close to the beach any different?

Mostly it comes down to sand and water. If earlier digs on your block hit water, say so, because a trench in sand can fill before it reaches depth. Mark any private lines you know about, such as irrigation or a shed power run, since Before You Dig plans usually won't show them. Luke then locates them by hand before the bucket gets near.

How do I check which of these rules apply to my lot?

Search the address on the City Plan map at cityplan.goldcoast.qld.gov.au and open Map Layers. Zones shows your lot's zone. Overlays includes Flood, Acid sulfate soils, Environmental significance (vegetation management), Bushfire hazard and Landslide hazard. Check the fire ant zone on the fireants.org.au map too, because zones change monthly. If you're still unsure, the City takes development questions on 07 5582 8708. Send Luke what you find, along with your photos.

Can soil from a Gold Coast job go to a tip in New South Wales?

Not without a permit. Under Queensland's fire ant rules, soil from a site in zone 2 can go directly to a waste facility in zone 2, but moving soil from inside the zones to anywhere outside them needs a biosecurity instrument permit, and the destination state's rules apply as well. Much of the Gold Coast is in zone 2 as at October 2026, so check the address first. Luke carts spoil to lawful tips or approved sites, with dockets.

Suburbs near Bilinga

Luke works right across the area. Pick a neighbouring suburb, or see all of Gold Coast.

Sources (checked October 2026)
  1. Wikipedia: Bilinga, Queensland
  2. NSW SES: Community FloodSafe guide, Tweed Heads South and Banora Point (October 2021, PDF)
  3. City of Gold Coast: Tree & vegetation removal on private land
  4. City of Gold Coast City Plan, version 14 (effective 29 September 2026): SC1.2 Administrative definitions
  5. City of Gold Coast: Change to ground level
  6. City Plan: 5.8 Operational work (Table 5.8.1 Change to ground level, Table 5.8.4 Vegetation clearing)

Get a quote

Your name, phone number, suburb and the type of job are all Luke needs. Everything else is optional, and photos help him quote without a site visit.

    Your details are used only to quote your job. Privacy policy. Prefer to talk? Call 0488 987 325 or text a photo.